Ultrasonic inspection – Leak Detection

Ultrasound a very useful physical measurement

Ultrasound is an acoustic vibration frequency too high to be audible. An ultrasound corresponds to a frequency above 20,000 Hz.

The human ear can perceive sound waves with frequencies between 20 Hz and 20 000Hz.

Ultrasound in maintenance

Many phenomena generate ultrasound, like  compressed air or pressurized gas leaks.

For example, defective bearings and lubrication, turbulence in the fluid or gas circuits.

Moreover, aeration and cavitation in pumps, electric partial discharge and  corona effects and many other phenomena yet, also generate ultrasound.

That is why in predictive maintenance the possibility to detect in an industrial environment ultrasound resulting from malfunctions can anticipate breakdowns and accidents and make energy savings.

With the LEAKSHOOTER ultrasound can be accurately measured. This allows to deliver a diagnosis.

High frequency sounds are more directional than low frequency. This facilitates the search for the source, even in the presence of ambient noise. By adding the vision and the photo to the ultrasonic measurement SYNERGYS TECHNOLOGIES with the LEAKSHOOTER has significantly improved this inspection technique.

Imagine a product that could simply hear and see ultrasounds simultaneously in real time, even during your industrial production?

SYNERGYS TECHNOLOGIES made it with the LEAKSHOOTER®.

Compressed air is probably one of the most expensive utility in your industrial plant.

Additional compressors are often installed to compensate air leaks.

Buying a LEAKSHOOTER® to  hunt air leaks could be more economical and more efficient and enable to improve your system efficiency.

The LEAKSHOOTER® will help you to save energy.